科勒西电 KR66RC 发电机组 柴油机配件

科勒西电 KR66RC 发电机组 柴油机配件柴油发电机/ KR66RCKOHLER-SDMO电力产品系列的标准发电机组可提供7.5至4,200 kVA的所有电力需求。它们专为工业用户设计,涵盖广泛的应用领域,提供广泛的选项和改造,以完全满足所有配置的要求。 通过安全的工程工具门户构建您的能源解决方案。使用尺寸调整程序功能,通过Spec Editor生成技术规格,并从产品目录中查看有关KOHLER-

  • 零件编号: 科勒西电 KR66RC 发电机组 柴油机配件
  • 配件名称: 发电机组 柴油机配件
  • 适用机型: 科勒西电 KR66RC 发电机组 柴油机配件
  • 产品品牌: KOHLER.SDMO
  • 产品价格:

科勒西电 KR66RC 发电机组 柴油机配件

柴油发电机/ KR66RC


KOHLER-SDMO电力产品系列的标准发电机组可提供7.54,200 kVA的所有电力需求。它们专为工业用户设计,涵盖广泛的应用领域,提供广泛的选项和改造,以完全满足所有配置的要求。
通过安全的工程工具门户构建您的能源解决方案。使用尺寸调整程序功能,通过Spec Editor生成技术规格,并从产品目录中查看有关KOHLER-SDMO工业发电机组的详细信息。

主要评级:图片关键词48千瓦(60千伏安)
图片关键词
待机评级:图片关键词52.8千瓦(66千伏安)
图片关键词
赫兹:图片关键词50赫兹
图片关键词
交流发电机类型:图片关键词4极,旋转场
图片关键词
引擎制造商:图片关键词约翰迪尔
图片关键词
发动机型号:图片关键词4045TF120
图片关键词
气缸布置:图片关键词4内联
图片关键词
额定转速下的最大功率:图片关键词70千瓦(93.9 BHP)
图片关键词
优质燃油消耗量图片关键词
100%负载:图片关键词16 Lph(4.23 gph)
75%负载:图片关键词12 Lph(3.17 gph)
50%负载:图片关键词8.5 Lph(2.25 gph)
图片关键词

KR66RC

Engine type

4045TF120

Alternator type

AT00810T

Canopy type

M3128

Performance class

G3

GENERAL CHARACTERISTICS

Frequency (Hz)

50

Voltage (V)

400/230

Max power ESP (kVA)

66

Max power ESP (kWe)

52.8

Max power PRP (kVA)

60

Max power PRP (kWe)

48

Intensity (A)

95

Standard control panel

APM303

Optional control panel

DEC4000

SMALL AUTONOMY DIMENSIONS

Length (mm).

2545

Width (mm).

1150

Height (mm).

1824

Dry weight (kg).

1576

Tank capacity (L).

390

Autonomy @ 75% of load (h)

N/A

Autonomy @ 50% of load (h)

 

POWER DEFINITION

PRP : Prime Power is available for an unlimited number of annual

operating hours in variable load applications, in accordance with

ISO 8528-1. ESP : The standby power rating is applicable for

supplying emergency power in variable load applications in

accordance with ISO 8528-1. Overload is not allowed.

TERM OF USE

According to the standard, the nominal power assigned by the genset

is given for 25°C Air Intlet Temperature, of a barometric pressure of

100 kPA (100 m A.S.L), and 30 % relative humidity. For particular

conditions in your installation, refer to the derating table.

SOUND LEVELS

75 (0.7)

63

Acoustic pressure level @1m in dB(A)

Acoustic pressure level @7m in dB(A)

Sound power level guaranteed (Lwa) 92

ASSOCIATED UNCERTAINTY

For the generating sets used indoor, where the acoustic pressure

levels depends on the installation conditions, it is not possible to

specify the ambient noise level in the exploitation and maintenance

instructions . You will also find in our exploitation and maintenance

instructions a warning concerning the air noise dangers and the need

to implement appropriated preventive measures.

DESCRIPTIVE

Four-pole circuit breaker

Connection terminal box rental type

Containment fuel tank and large autonomy

Forks and frame protection pads

Battery isolating switch

Heavy duty air filter with interchangeable cartridge

Access door to the radiator

KR66RC

ENGINE SPECIFICATIONS

 

JOHN DEERE

4045TF120

Turbo

L

4

4.48

106 x 127

1500

6.35

70

+/- 2.5%

11.24

GENERAL ENGINE DATA

Engine model

Engine type

Air inlet

Cylinders arrangement

Number of cylinders

Displacement (L)

Charge Air coolant

Bore (mm) x Stroke (mm)

Compression ratio

Speed (RPM)

Pistons speed (m/s)

Maximum stand-by power at rated

RPM (kW)

Frequency regulation, steady state (%)

BMEP (bar)

Governor type Mechanical

COOLING SYSTEM

Radiator & Engine capacity (L) 23.6

Max water temperature (°C) 105

Outlet water temperature (°C) 93

Fan power (kW) 1.4

Fan air 2.53 flow w/o restriction (m3/s)

Available restriction on air flow (mm

H2O)

Type of coolant

20

Glycol-Ethylene

Thermostat modulating range HT (°C) 82-94

60

190

N/A

150

545

176

EXHAUST

Exhaust gas temperature @ ESP 50Hz (°C)

Exhaust gas flow @ ESP 50Hz (L/s)

Max. exhaust back pressure (mm H2O) 750

17.5

16

12

8.5

FUEL

Consumption @ 110% load (L/h)

Consumption @ 100% load (L/h)

Consumption @ 75% load (L/h)

Consumption @ 50% load (L/h)

Maximum fuel pump flow (L/h) 108

13.5

1

5

0.016

OIL

Oil capacity (L)

Min. oil pressure (bar)

Max. oil pressure (bar)

Oil consumption 100% load (L/h)

Oil sump capacity (L) 12.5

54

8

HEAT BALANCE

Heat rejection to exhaust (kW)

Radiated heat to ambient (kW)

Heat rejection to coolant (kW) 35

625

AIR INTAKE

Max. intake restriction (mm H2O)

Intake air flow (L/s) 66

17 : 1

N/A

EMISSIONS

Emission PM (mg/Nm3) 5% O2

Emission CO (mg/Nm3) 5%) O2

Emission HC+NOx (g/kWh)

Emission HC (mg/Nm3) 5% O2

KR66RC

ALTERNATOR SPECIFICATIONS

 

GENERAL DATA

Alternator type AT00810T

Number of Phase Three phase

Power factor (Cos Phi) 0.8

Altitude (m) 0 to 1000

Overspeed (rpm) 2250

4

Yes

Number of pole

Capacity for maintaining short circuit at

3 ln for 10 s

Insulation class H

T° class (H/125°), continuous 40°C H / 125°K

T° class, standby 27°C H / 163°K

AVR Regulation Yes

Total Harmonic Distortion in no-load<3

DHT (%)

Total Harmonic Distortion, on load DHT

(%)<2

Wave form : NEMA=TIF<50

Wave form : CEI=FHT<2

Number of bearing 1

Coupling Direct

0.5

500

Voltage regulation at established rating

(+/- %)

Recovery time (Delta U = 20%

transient) (ms)

Protection class

Technology

IP 23

Without collar or

brush

OTHER DATA

Continuous Nominal Rating 40°C (kVA) 60

Standby Rating 66 27°C (kVA)

Efficiencies 100% of load (%) 90.3

Air flow (m3/s) 0.1

Short circuit ratio (Kcc) 0.436

Direct axis synchro reactance unsaturated (Xd) (%) 283

Quadrature-axis synchro reactance unsaturated (Xq)

(%)

Open circuit time constant (T'do) (ms) 962

14.7

50

7.3

5

10.5

Direct axis transient reactance saturated (X'd) (%)

Short circuit transient time constant (T'd) (ms)

Direct axis subtransient reactance saturated (X''d) (%)

Subtransient time constant (T"d) (ms)

Quadrature-axis subtransient reactance saturated

(X"q) (%)

Subtransient time constant (T"q) (ms) 5

Zero sequence reactance unsaturated (Xo) (%) 0.9

Negative sequence reactance saturated (X2) (%) 8.93

Armature time constant (Ta) (ms) 8

0.77

3.18

21.5

119.61

13

1119.57

No load excitation current (io) (A)

Full load excitation current (ic) (A)

Full load excitation voltage (uc) (V)

Engine start (Delta U = 20% perm. or 50% trans.)

(kVA)

Transient dip (4/4 load) - PF : 0.8 AR (%)

No load losses (W)

Heat rejection (W)

Unbalanced load acceptance ratio (%)

5135.15

100

115

KR66RC

CONTROL PANEL

 

DEC4000, ergonomic and user-friendly APM303, comprehensive and simple The APM303 is a versatile unit which can be operated in manual or automatic mode. It offers the following features:

Measurements:

phase-to-neutral and phase-to-phase voltages, fuel level

(In option : active power currents, effective power, power factors, Kw/h energy meter, oil pressure and coolant

temperature levels)

Supervision:

Modbus RTU communication on RS485

Reports:

(In option : 2 configurable reports)

Safety features:

Overspeed, oil pressure,coolant temperatures, minimum and maximum voltage, minimum and maximum frequency (Maximum active power P<66kVA)

Traceability:

Stack of 12 stored events

For further information, please refer to the data sheet for the

APM303.

The highly versatile DEC4000 control unit is complex yet

accessible, thanks to the particular attention paid to

optimising its ergonomics and ease of use. With its large

display screen, buttons and scroll wheel, it places the

accent on simplicity and communication.

The DEC4000 offers the following functions:

Electrical measurements: voltmeter, frequency meter,

ammeter.

Engine parameters: working hours counter, oil pressure, coolant temperature, fuel level, engine speed, battery

voltage.

Alarms and faults: oil pressure, coolant temperature, failure to start, overspeed, alternator min./max., battery voltage

min./max., emergency stop, fuel level.

Ergonomics: wheel for navigating around the various

menus.

Communication: remote control and operation software,

USB connections, PC connection.

For more information on the product and its options, please refer to the sales documentation.